CRAZE 8K Mod-Kit [Razer Deathadder V3 Pro Mod] 32g

CRAZE 8K Mod-Kit [Razer Deathadder V3 Pro Mod] 32g

Swap the shell of your mouse to significantly reduce its weight – our Mod-Kit includes everything you need.

Required Internals Razer Deathadder V3 Pro

Inspiration Deathadder V3 Pro [5% smaller]

Dimensions [mm] 121.94 x 64.10 x 40.38

Weight 32g, Solid version adds 3g

VERSION:

SOLID [+3G]

SOLID [+3G]LIGHT

Coating:

Standard

StandardUltraGrip 2.0

Variant

€69,90

WORLDWIDE SHIPPING

We ship from Germany and the estimated delivery times are:

UPS Shipping:
Germany: 1 day
Europe : Up to 3 days
Worldwide: Up to 5 days

Standard Shipping:
Germany: Up to 3 days
Europe: Up to 7 days
Worldwide: Up to 14 days Shipping fees vary based on the destination

RETURN WITHIN 14 DAYS

No questions asked! Product has to be in good condition.

IN THE BOX

// Custom Mouse Shell

// 150mAh Battery

// PTFE Skates

// Grip Tape

// Tools

Note: Internals are not included. Designed for use with your existing Razer Deathadder V3 Pro internals.

BUILDING TIME

60 minutes

DIFFICULTY LEVEL

Advanced

TOOLS

All required tools are included.

INSTRUCTIONS

Card with instructions link is included. Instructions available here.

COATING

Our ceramic UltraGrip 2.0 coating offers excellent grip with a smooth, dry, slightly chalky feel. It can add up to 2g. Each finish is carefully crafted by hand through a refined and time-consuming process.

The Standard Coating has a slightly glossy, grainy texture for a raw feel.

Standard

UltraGrip 2.0

The mouse is: Insane in the membrane

The mouse is: Insane in the membrane. Perfect mod for a Deathadder V3 Pro

I really like the feel of the Coating

I really like the feel of the Coating. Not sure if will use grip tape for the mouse buttons yet.

FAQ

Discover additional information about the coverage of your warranty, the shipping process, and the product itself. Feel free to contact us if you require any additional clarification.

Which internals are compatible with this shell?

With this shell only the electronics of the Razer Deathadder V3 Pro are compatible. No other.

Which skates are compatible?

If the bottom of the mouse is open, only G305 or dot skates are compatible.

How long does shipping take?

We ship from Germany with UPS and it usually takes 1-2 working days within Germany, up to 3 days within the EU and 3-5 days outside of the EU.

Do I have warranty on my order?

PMM gives you a 1 year warranty on all products. Get in touch with support if anything happens!

Where do I find the instructions for the MOD-KIT?

You can find the link to the instructions on the card that comes with your order.

Which software works with the mouse?

You can use: Synapse 3

How do I turn the mod on and off?

To turn on the mouse, press the power button for 3 seconds. Pressing the button for another 3 seconds will change the DPI. Pressing it for 6 seconds will turn the mouse off. It is not necessary though since the mouse will go in sleep mode after a set time which is very energy saving.

My battery percentage doesn’t go to 100%. How come?

If you are using our 150mAh battery, that is normal. It often just shows a battery percentage of around 50% since the software thinks that it’s half empty.

How do I update the firmware?

You can update the firmware using this guide: Firmware Update

How do I pair a different dongle to my mouse?

You can use this link for the 1k dongle:
https://mysupport.razer.com/app/answers/detail/a_id/6076

For the 8K dongle follow this:

First make sure to update the firmware as written earlier.

You might need to update the dongle firmware.
https://mysupport.razer.com/app/answers/detail/a_id/13746

Then you can connect the dongle in Synapse after clicking on the Dongle and then "Open Pairing Utility".
1K Dongle Dongle Firmware Update

Is the mod reversible?

Yes, the mod is fully reversible. However, it is possible that you will need to get new skates when you want to assemble the mouse again.

CRAZE 8K Mod-Kit [Razer Deathadder V3 Pro Mod] 32g

COATING

Customer Reviews

FAQ